Products
Manufacturer:
Image | Product | Short description | |
![]() |
REPAIR/REFURBISH | Drive-Line Inc. has many years of experience repairing and refurbishing industrial brakes and clutches of all makes and models including Twiflex mine hoist brakes. | more info |
![]() |
REPAIR/REFURBISH | Drive-Line Inc. has many years of experience repairing and refurbishing industrial brakes and clutches of all makes and models including Twiflex mine hoist brakes. | more info |
![]() |
Low Inertia Air Tube Disc Clutches and Brakes | For high cyclic and general clutching duties. Specially designed for end-shaft mounting onto a bearing supported flywheel or gear wheel. | more info |
![]() |
CCB Series Clutches/Brakes | For start/stop cyclic applications. The CCB consists of an air applied clutch and a spring applied / air release brake combined in one unit. | more info |
![]() |
Ball or Grinding Mill Clutches | Wichita Grinding Mill Clutches are specially designed to provide quick, smooth starts with limited current surge for heavy duty grinding mills. The clutch is adaptable to remote control allowing centralized operation through simple air or electric circuits. | more info |
![]() |
Air PTO Power Take Off Clutch | Wichita's Air PTO is powered by our heavy-duty Standard Vent clutch. With large friction areas for high energy starts and an air actuated clutch for remote or automatic control of the PTO. | more info |
![]() |
Mechanical PTO Power Take Off Clutch | Wichita's mechanical PTO's are powered by Eaton's Solo mechanical 2-plate clutch. Built-in damping springs on the clutch; driven discs and no pilot bearing are some of the standard features that make Wichita's mechanical PTO user friendly when applied in the harsh environment of diesel engines. | more info |
![]() |
KK/SS - Kopper Kool /Spring Set Brake or Clutch | For high-energy continuous slipping applications such as dynamic tensioning duties where 'fail to safety' is required. The KK/SS is suitable for end-shaft or through-shaft mounting | more info |
![]() |
AquaMakks Water Cooled Clutches & Brakes | AquaMaKKs clutches and brakes are pneumatically or hydraulically controlled and water cooled. They consist of a series of alternating friction discs and water jackets. Torque is transmitted by applying axial force from the pneumatic, hydraulic, or spring set actuator. Copper wear plates are used for excellent heat dissipation. | more info |