212 Wyecroft Road, Unit 23, Oakville, Ontario, Canada, L6K 3T9
Toll Free: 1-800-667-2858
Fax: 1-888-217-7926

Book Assessment
Products / Industrial Brake and Clutch Systems / Series 5.0

Series 5.0 is the latest version of Goizper’s traditional design of an industrial brake and clutch system, assembled by pins that tighten both covers for avoiding deformation and breakage due to stress. The brake side cover is manufactured in aluminum, obtaining a low inertia.

Some of these industrial brake and clutch assembly examples are:

  • Mounting between frame and flywheel by means of identical pins in both clutch and brake sides
  • Mounting at shaft end by means of 12 bushings on the clutch side and two pins on the brake side
  • Mounting at shaft end by means of pins on different diameters an both clutch and brake side

Goizper pneumatic industrial brake and clutch combinations are used in the following applications: Metalforming Presses, Shears, Die Cutters, Forming Machines, and Can Body Makers. We have added technical information to assist you in your selection.