212 Wyecroft Road, Unit 23, Oakville, Ontario, Canada, L6K 3T9
Toll Free: 1-800-667-2858
Fax: 1-888-217-7926

Book Assessment
Products / Industrial Brake and Clutch Systems / Series 5.6

Series 5.6 corresponds to an industrial brake and clutch system with double disc on the clutch side, in order to get a lower inertia. Its external covers and hubs are made of electro-welded steel. The 5.6 series is similar to 5.5 but have a double disc on both sides, improving the torque-inertia rate.

Series 5.6 industrial brake and clutch assemblies include:

  • Mounting between frame and flywheel by means of 4 pins at 90° on the clutch side and 4 pins at 90° on the brake side, all along the same diameter
  • Mounting at shaft and by means of 4 pins at 90° on the clutch side and 2 pins connected to double discs on brake side, along different diameters

The Goizper pneumatic industrial brake and clutch combinations are used in the following applications: Metalforming Presses, Shears, Die Cutters, Forming Machines, and Can Body Makers. We have added technical information to assist you in your selection.