Browse By Category
  • Back to product list

    Miniature End-of-Shaft Mount Clutch

    MINIATURE SERIES
    MINIATURE BRAKES, CLUTCHES AND TORQUE LIMITERS

     

    Motion Control Solutions for Tight Spaces, Small Shafts and Light Torque Requirements.

     

    For torque requirements of less than 200 Pound Inches.
    For shaft sizes 0.3125 to 0.500 Inch, or 7 to 12mm.
    Can be fitted at the factory with pulleys, sprockets or special couplings
    Available with sealed housings, and made from corrosion resistant and food grade materials.

     

     

    AIR ENGAGED CLUTCHES – END OF SHAFT
    End of Shaft Bored, Pilot Mount Friction Clutches

     

    Function: Connect, Disconnect
    Drive Arrangement: Shaft to Pilot Mounted Component or Pilot Mounted Component to Shaft

    Operation

    Industrial friction clutch engages with air pressure, spring released when air is exhausted.
    Torque is linear in response to air pressure applied.

     

    Mounting

    End of Shaft.
    Friction clutch slides on shaft and is fixed with set screws and a customer supplied key.
    No anti-rotation arm required.
    Friction clutches are designed for horizontal mounting. If vertical mounting is required, consult engineering for options.

     

    Applications

    Friction clutches are suitable for Connect/Disconnect and Cycling applications.
    Maximum RPM varies by model. Please consult the detail sheets (below). Consult engineering if the intended application exceeds the listed maximum RPM.

     

    Design Features

    Industrial friction clutches are bored to suit up to the maximum shown (US & Metric) for easy installation.
    Low coefficient friction lining versions are available for applications requiring slip or a narrower torque range. Contact engineering for details.
    Machined pilot for easy mounting of pulley or sprocket.
    Includes rotary air seal.

     

    Product Code 

    Torque @ 80 PSI 

    Maximum Bore with Standard Keyway (Inches / Millimeters) 

    Detail Sheet 

    C2D2R-STH 

    202 lb-in 

    0.500 in (12 mm) 

    VIEW PDF 

    C3D2R-STH 

    555 lb-in 

    1.000 in (24 mm) 

    VIEW PDF 

    C4D2R-STH 

    1,317 lb-in 

    1.250 in (31 mm) 

    VIEW PDF 

    C5D2R-STH 

    2,587 lb-in 

    1.438 in (38 mm) 

    VIEW PDF 

    C5D3K-STH 

    4,690 lb-in 

    1.563 in (40 mm) 

    VIEW PDF 

    C6D2G-STH 

    5,397 lb-in 

    2.000 in (52 mm) 

    VIEW PDF 

    C6D3K-STH 

    7,405 lb-in 

    2.000 in (52 mm) 

    VIEW PDF 

    C8D3K-STH 

    14,855 lb-in 

    2.500 in (66 mm) 

    VIEW PDF 

    CAD3K-STH 

    30,795 lb-in 

    2.750 in (72 mm) 

    VIEW PDF 

    CBD3K-STH 

    41,008 lb-in 

    3.500 in (95 mm) 

    VIEW PDF 

    Book a FREE Assessment

    Drive-Line Inc. is proud to have partnered with some of the leading manufacturers of industrial clutches and brakes to deliver you the most advanced motion control solutions available on today’s market.