Browse By Category
  • A version of this brake, known as the VCS-FL, is available for use where space is limited and when the brake disc has excessive lateral movement. Only one brake module is used with a reactive pad plate.

     

    The Twiflex VKCS-FL disc brake caliper comprises a single spring module forming the 'active' side of this floating unit and is available for use where space is limited or to accommodate axial disc float of ±6mm. 

     

     

    Braking force ratings are achieved through a combination of shim number and air gap setting. Spring fatigue life is a function of the caliper rating. The ratings shown in the table are based on fully bedded in and conditioned brake pads with a nominal friction coefficient µ = 0.4. Twiflex disc brakes must be used with Twiflex asbestos free brake pads.

     

    Effective disc radius = actual radius (m) - 0.064m.

    • Custom finishes and protection to suit the installed environment
    • Protects against ascending overspeed and unintended movement
    • Ensures stoppage in a smooth and safe manner when experiencing power or other system failure
    • Braking force from 14 kN to 62 kN
    • Highly modular-greater braking torques achievable with use of multiple brakes
    • Low pad pressures-Pad area = 296.8 cm2 (2 pads)
    • Hydraulic power supply units also available

    Book a FREE Assessment

    Drive-Line Inc. is proud to have partnered with some of the leading manufacturers of industrial clutches and brakes to deliver you the most advanced motion control solutions available on today’s market.